WPF - Exterior self-healing automotive window film - 1 x 1.52 metres
(4/5)
Based on 3
unique ratings.
-+- No articles matches your choice -+-
-+- No articles matches your choice -+-
(4/5)
Based on 3
unique ratings.
CLEARSHIELD® WPF · EXTERIOR PROTECTION FILM · SOLAR GARD®
Clearshield® WPF - invisible protection for windscreens and vehicle glazing
Protect your vehicle's glass against stone chips, road debris, scratches and everyday wear with a flexible, optically clear TPU film from Solar Gard®. Clearshield® WPF is installed on the exterior of the glass and creates a discreet protective barrier without compromising visibility.
Quick facts
Material:
Flexible TPU with a protective topcoat
Installation:
On the exterior of the glass
Thickness:
Approx. 8 mil / 200 micrometres.
UV protection:
Blocks more than 99 %
Options:
15, 40, 70 and completely clear
Warranty:
Up to 5 years depending on glass location
Takes the first impact
The durable film absorbs and distributes force from smaller stone chips and road debris before the impact reaches the glass.
Optically clear
The TPU layer is designed for very low distortion and a smooth, clear view through the vehicle glass.
More than 99 % UV protection
All options block more than 99% of UV radiation and help protect passengers and the interior.
Conforms to curved glass
The flexible and slightly stretchable material adapts smoothly to curved and more complex glass surfaces.
FOUR PERFORMANCE LEVELS
Choose the right balance of protection, privacy and light
Clearshield® WPF is available as a completely clear protection film and in three tinted options. All options combine surface and UV protection with high optical quality.
WPF 15
Maximum privacy
The darkest option for effective solar protection and maximum privacy where tinting is permitted.
WPF 40
Balanced tint
A versatile option combining comfort, solar protection, privacy and good visibility.
WPF 70
Light and discreet
For glazing where abundant light and unobstructed visibility are important while solar heat is reduced.
WPF CLEAR
Almost invisible protection
Completely clear film for discreet surface protection that preserves the glass's original appearance and visibility.
ADVANCED CONSTRUCTION
Flexible TPU with a protective topcoat
Clearshield® WPF is designed for exterior use and combines several functional layers:
• Topcoat with self-healing properties against minor surface marks
• Optically clear TPU with very low distortion
• Integrated solar-control properties in the tinted options
• Specially developed transparent adhesive for stable adhesion
PROTECT THE ORIGINAL GLASS
Can reduce the risk of costly glass replacement
Windscreen replacement on modern vehicles may also require calibration of cameras and advanced driver-assistance systems, known as ADAS. By helping protect the original glass against minor stone chips and wear, WPF can contribute to fewer repairs and replacements over time.
Protection reduces the risk - but not every risk
No film can prevent every type of glass damage or stone chip. Very heavy impacts can still damage the glass.
PROFESSIONAL INSTALLATION RECOMMENDED
Read the installation instructions before starting
Clearshield® WPF is wet-installed on the exterior of the glass. The glass must be thoroughly cleaned, and the film must be positioned and squeegeed using the correct technique to achieve an even, optically clear and durable result.
A small amount of moisture may remain beneath the film immediately after installation. Temporary milkiness or haze is normal and usually disappears within a few days, depending on the weather and drying conditions.
CARE AFTER INSTALLATION
How to preserve the film's clarity and performance
Clean gently
First rinse away grit and larger dirt particles. Then wash with mild soap and water using a soft microfibre cloth or sponge.
Avoid strong and abrasive products
Do not use ammonia-based cleaners, strong chemicals, coarse cloths, brushes, scrapers or abrasive sponges on the film.
Never operate the windscreen wipers dry
Always wet the glass with washer fluid or water before using the windscreen wipers. A dry surface increases the risk of scratches and wear.
Do not use an ice scraper
Melt ice with a de-icer, the vehicle's defroster or lukewarm water. Remove it carefully with a soft cloth or gloves. Never use boiling water.
WARRANTY
Warranty by application area
Roof glass and side windows: up to a 5-year limited product warranty.
Windscreen and rear window: 1 year or a maximum of 12,000 km, whichever occurs first.
The warranty applies in accordance with Solar Gard's complete terms, limitations and requirements for correct installation and care.
IMPORTANT BEFORE ORDERING AND INSTALLATION
Check the regulations and select a suitable option
Always check applicable local regulations before installing film on the windscreen or other vehicle glazing. Select an option permitted for the relevant glass position and follow the complete installation instructions. WPF is not recommended for rear windows with a rear wiper.
Read more
Show less
(4/5)
Based on 3
unique ratings.
SWEDEN / SEK
Special price8 264 SEK(Ordinary price: 10 595 SEK)Earlier lowest price: 1 599 SEK
Special price13 256 SEK(Ordinary price: 16 995 SEK)Earlier lowest price: 10 000 SEK